How To Remove An Exterior Wall

Download Article

Download Article

When it comes to domicile comeback projects, it'south great to know that with the right equipment and methods, no paint job is permanent, and removal is often an easy process! Whether you take come to regret a color choice or make a mistake, pigment can be stripped off using specialized equipment like a paint scraper, sandpaper, or a estrus gun. The method that you lot use volition be based on your budget, the type of wall and paint, and your confidence in treatment the tools. Once you accept this figured out and you acquire your tools, you'll exist well on your way to getting that paint off of your wall so yous can make it look better than always!

1. one

   Clean the wall with soap and hot h2o. To set the wall for sanding, starting time make full a bucket with hot h2o and soap. Then, soak a material in the h2o and wash off the wall. This will remove any dirt or markings that the paint has accumulated, simplifying the residue of the job.^[i]

2. ii

   Buy a sanding cake or sander to use. Unfortunately rubbing sandpaper against the wall won't work very well. Instead you volition need to invest in a sanding block or a sander. A sanding block is a small cake of fabric that you can wrap sandpaper around, making it easier to sand flat surfaces. A sander is a automated tool like a drill that you load sandpaper into and it sands the surface for you. ^[2]

   • To utilise a sanding block, wrap the sandpaper around one side of the block and grip it with your mitt from the other side.
   • Sanders can differ in how you load them with the sandpaper, but generally they have a slot that you can load the sandpaper into before turning information technology on. If you oasis't used a sander earlier, a sanding block is a safer choice.
   • A coarser grit on the sandpaper is acceptable considering you're aiming to strip the unwanted paint. Utilise fourscore-grit sandpaper if y'all're looking to remove globs of paint.
   • Sanding a wall will crusade a take chances of inhaling toxic dust, and then wearable a mask before beginning.

   Advertizement

3. 3

   Sand away the unwanted paint. Rub the fibroid side of the sandpaper confronting the pigment. Move the sanding cake or sander back and forth in ane square foot (0.09 foursquare meter) sections. Apply lots of pressure to the wall if y'all are using a sanding block.

   • Sand the unwanted paint until the entirety of the paint becomes deadening.^[3] Then, wipe away the dust.

4. 4

   Strip the paint if you want to remove it entirely. If you lot prefer to remove the paint entirely as opposed to painting over it, use a paint scraper to pare off the remaining unwanted paint.

   • Place the pigment scraper's blade at the lesser of the unwanted paint, apply pressure level to the bract, and slide information technology under the unwanted pigment, peeling the paint off.^[4]
   • The sanding procedure volition have weakened the paint, making information technology easier to strip.

Advertising

1. 1

   Buy chemically-resistant gloves and ventilate the room. Chemical paint strippers eat abroad at the chemical structure of pigment, so they are naturally caustic.^[5] Before beginning this process, make certain you've purchased chemically-resistant gloves to use. Additionally, wear old clothing that you don't listen getting damaged.

   • Open several windows. Keeping the room you're in well ventilated is key equally pigment strippers can build upwards toxic fumes if in that location's a lack of fresh air.

2. 2

   Remove all piece of furniture and cover the floor. Chemical paint strippers won't discriminate what they eat through, so make certain the room is clear of all precious items. Motion all furniture to a different room while yous're removing the paint.^[6]

   • To proceed your floor safe you lot'll need to purchase several materials from your nearest DIY store. Yous volition demand 1 large sail of plastic and another large sheet of either kraft or rosin paper.
   • Lay a sheet of plastic from the base of operations of the wall across the floor. Then, layer a canvas of kraft or rosin paper on top of it. If any of the pigment stripper lands on the floor, this layer will protect your floor from damage.

3. three

   Layer the wall with a thorough blanket of the paint stripper. Paint stripper is best applied with a broad paintbrush. If yous don't accept 1, make sure you buy one before commencement. Dip the paintbrush into the paint stripper, then layer it over the entirety of the wall. Put on a coating roughly ^ane⁄₈ inch (0.32 cm) thick so that it won't dry too speedily. The coating thickness doesn't need to exist as well precise, yous can mostly gauge the thickness by eye.^[7]

   • If you're working on a vertical surface, apply a paint stripper that is closer to a paste in texture and then that information technology won't drip onto you.

4. 4

   Wait for the stripper to take effect. The chemical process may have minutes or hours depending on the stripper you lot're using. Read the product's instructions and wait equally directed for the most efficient use of your time.^[8]

5. five

   Scrape the pigment off once you lot see bubbles. The pigment on the wall should have started to chimera once you've waited for the directed amount of time. In one case bubbles, take a paint scraper (if yous don't take one, a putty knife or a spatula would work as well) and scrape off all the paint.^{[9] [10]} It should come off in long peels. Try to get as much paint off the wall as possible.

   • To use a pigment scraper, place the blade at the bottom of the paint you wish to remove, apply pressure level and so the bract slides under the paint, then peel the pigment off as you slide the paint scraper upwards.
   • If at that place are any awkward spots, try using toothpicks or toothbrushes yous don't plan on using again to scrape off the paint.
   • If there is an underlying layer of paint that is notwithstanding solid, you volition need to apply another layer of chemical paint stripper to remove that layer separately.

6. 6

   Follow the paint stripper instructions to neutralize the wall once you're finished. If you programme to repaint the walls, the paint stripper you've just used will cause your new layer of paint to neglect. The method used to neutralize a paint stripper is different for each production, only usually, information technology'south either a water launder, a mineral spirit, or a specialized product.^[xi]

   • For example, a neutralizer may enquire you to mix 1 gallon (three.8 L) with 4 fluid ounces (120 mL) of neutralizer. And so, apply this mixture with a textile to wash the wall.
   • Cheque your stripper instructions and utilize even so directed.

Advertizement

1. 1

   Purchase protective eyeglasses, a long-sleeved shirt and thick gloves. You will be dealing with a high rut appliance, then brand certain to use protective eyeglasses and utilise a thick long-sleeved shirt if you have one, also equally a thick pair of gloves to avert burns.^[12]

   • You volition likewise demand a paint scraper for this method.

2. 2

   Craft a heat shield if you only want to strip a specific spot. A rut gun is all-time suited for stripping full walls, but if there is a specific spot you wish to strip you'll need to utilise a heat shield.^[13]

   • With a pair of pair of scissors, cut out a cardboard ring slightly larger than your target expanse. And so, wrap the paper-thin ring in aluminum foil. Identify the shield over the spot and continue the procedure.

3. 3

   Utilise estrus on the unwanted paint. In a wide sweeping motion, keeping the nozzle of the rut gun approximately ii inches (v.1 cm) away from the surface, steadily utilize heat to foursquare sections of the wall. Y'all can measure these sections using a tape mensurate.

   • To get-go with, heat a 3 anxiety (0.91 m) department on the wall.^[fourteen]
   • You'll know you're ready for the next stride when the pigment visibly begins to loosen its agree on the surface beneath it.
   • If you are using a heat shield, focus the nozzle on the single area for a shorter amount of time until you visibly encounter the paint begin to loosen.

4. iv

   Scrape away all unwanted paint at the pre-heated department. With a paint scraper, scrape away all the loosened paint abroad from the section you heated before. Pierce the loose paint with the bract of the paint scraper, then scrape upwards as if you were shovelling snow to remove the pigment.^[15]

5. 5

   Repeat the process over the entire wall. Choose a new 3 anxiety (0.91 m) section on the wall, heat it up, and so scrape the paint off. Keep repeating until you've removed the paint off the entire wall section by department.^[16]

Advertisement

Add New Question

• Question

  What is the easiest way to remove sometime paint?

  

  Patrick Coye is the owner and operator of Patrick's Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To engagement, Patrick and his squad have painted over 2,000 houses and stained over 800 decks. Patrick'southward Company won a "Top Job" award from the American Painting contractor magazine in 2022.

  

  Painting Specialist

  Practiced Reply

  Apply a paint stripper to the surface and look the recommended amount of time for it to accept effect. And then, you can use a putty knife to scrape information technology odd.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

Things Y'all'll Need

• A textile
• A bucket
• Soap
• 180-dust sandpaper or 80-dust sandpaper
• A sander or sanding block
• A dust mask
• A paint scraper

• Chemically-resistant gloves
• Plastic sheet
• Rosin paper or kraft paper
• Chemical paint stripper
• A pigment scraper

• Estrus gun
• A pigment scraper

Nearly This Commodity

Article Summary X

To remove paint from drywalls, get-go past cleaning the wall with soap and hot h2o to remove whatever dirt or markings from the paint. Then, apply a sanding block or sander to rub abroad the unwanted paint. If y'all want to strip the paint off completely, every bit opposed to painting over it, you lot can utilise a paint scraper to peel off any remaining paint. Alternatively, if you desire to remove paint from plaster walls, layer the paint with a thorough coating of chemic paint stripper. Brand sure you open the windows and use chemically-resistant gloves to protect yourself. Once the paint has started to bubble, take a paint scraper and scrape off the pigment. If you lot want to repaint the wall, follow the paint stripper's instructions for neutralizing the wall so information technology doesn't ruin your new paint. For more tips, including how to use a heat gun to remove pigment from wooden walls, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 196,504 times.

Did this article assist y'all?

Source: https://www.wikihow.com/Remove-Paint-from-Walls

Share this post